How to crimp and assemble connector

Manufacturer:- Aftermarket

2 way large panel mount connector with external double latch which is used on KTM Husqvarna and other motorcycles.

Replacement connector part for 000700000BL & 000700000CD

Cable Size:- 2.1mm² to 5.3mm² / AWG 14 - 10

Can have cable pigtails added, see below:-

Also used on various other manufacturers machines.

Crimp with larger  "W" shaped crimper like TT72, TT73

Add connector to the basket. Cable pigtails with your colour choices can then be added to this connector for a small charge from list below. Please allow up to 48hrs for the crimping to be completed.

1mm 16.5 Amp 1.95mm O.D. Solid Colour Cable HERE,

1mm 16.5 Amp 1.95mm O.D Tracer Colour Cable HERE

1.5mm 21 Amp 2.3mm O.D. Solid Colour Cable HERE,

3 way large panel mount connector with external double latch which is used on KTM & Husqvarna motorcycles. Also used on other manufacturers machines.

Replacement part for KTM  000700000BM

Cable Size:- 2.1mm² to 5.3mm² / AWG 14 - 10

Crimp with "W" shaped crimp like TT72, TT73

9 way large panel mount connector with external double latch which is used on KTM motorcycles. Also used on other manufacturers machines.

Cable Size:- 2.1mm² to 5.3mm² / AWG 14 -10

Crimp with "W" shaped crimp like TT72, TT73

These white Ducati indicator connectors are the OEM part used on the main wiring looms of various Ducati's.

Can have cable pigtails added, see below:-

Crimp using a crimper suitable for use on micro terminals. Supplied with 2 x male and 2 x female terminals.

Other known part numbers: Male KTM 000700000CX, Female KTM 000700000CW

Fits the following Models but please compare pictures before ordering:

Monster: 696, 796,821, 1100, 1100 evo, 1100s, 1200, 1200s

Multistrada: 1200 2012, 1200 2013, 1200s 2013, 

Panigale: 899, 1199, 1199s

Hypermotard: some models*  821, 821SP

(Check pictures as some Hypermotards use the opposite side of the connector on the loom)
 

848

1098, 1098s

KTM: 690 Enduro, KTM200 EXC,

Add connector to the basket. Cable pigtails with your colour choices can then be added to this connector for a small charge from list below. Please allow up to 48hrs for the crimping to be completed.

0.5mm 11 Amp 1.7mm O.D. Solid Colour Cable HERE
 

Manufacturer:- Aftermarket

These adaptor leads allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Supplied as pictured as a pair of leads with tinned 3.9mm sockets already crimped with insulation covers.

Fits the following Models, (rear only on some models):

Ducati 848 2010-10

Ducati 1098 2007-08, 1198 2009-11,

Ducati 899, 1199 Panigale

KTM: 690 Enduro, KTM200 EXC, 

MV Agusta Brutale / Dragster, 67,5 800, 990R, 1090R, F3 657

KTM 690 Enduro (will fit other KTM's but please check the way the pulg is wired with red/black leads, we can supply opposite type wiring)

Manufacturer:- Aftermarket

These pigtails allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Supplied as pictured as a pair of leads with 4 red glue lined heat shrink terminals for a completely sealed connection onto the indicators

Fits the following Models, (rear only on some models):

Ducati 848 2010-10

Ducati 1098 2007-08, 1198 2009-11,

Ducati 899, 1199 Panigale

MV Agusta Brutale / Dragster, 67,5 800, 990R, 1090R, F3 657

KTM 690 Enduro, KTM200 EXC (will fit other KTM's but please check the way the pulg is wired with red/black leads, we can supply opposite type wiring)

Manufacturer:- Aftermarket
 

These pigtails allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Supplied as pictured.

Fits the following Models, (rear only on some models):

Ducati 848 2010-10

Ducati 1098 2007-08, 1198 2009-11,

Ducati 899, 1199 Panigale

MV Agusta Brutale / Dragster, 67,5 800, 990R, 1090R, F3 657

KTM 690 Enduro, KTM200 EXC (will fit other KTM's but please check the way the plug is wired with red/black leads, we can supply opposite type wiring)

Manufacturer:- Aftermarket
 

These 3 way sealed white sealed Ducati tail connectors are the OEM part used on the main wiring looms of various Ducati's and other motorcycles.

Crimp using a crimper suitable for use on micro terminals.

KTM OEM part numbers. Male part KTM 000700000CZ, Female part KTM 000700000CY

Manufacturer:- Aftermarket

10 pack of female terminals used on the larger white panel mount connector with external double latch which is used on KTM motorcycles. Also used on other manufacturers machines.

Cable Size:- 2.1mm² to 5.3mm² / AWG 14 - 10

Crimp with "W" shaped crimp like  TT72, TT73

Note:- These are the larger sized terminals used on some KTM machines. See part MOL-FT-10 for the smaller size terminals