Honda 2 way Grey Connector with white terminal lock, terminals and cable seal. Used on some CLT / IAT temperature & knock sensors and other components on Honda B series cars and Suzuki motorcycles.
Length: 30mm, Width 18mm, Height: 22mm including locking latch.
Mating Half:- 2W-HON-MAL-TEMP-CONN
It has a slightly wider keyway and will also fit in place of the black connector.
Can have cable pigtails added, see below:-
FITS: Hayabusa Gen 2 Inlet Air Temperature (IAT)
Honda RS125 Water Temperature
Honda RS250 Water Temperatue
Honda oil pressure, IAT and Knock Sensor
Suzuki Fan Switch
GSXR600 1997- 2005
GSXR750 1996 - 2005
TL1000S 1997 - 2001
GSXR1000 K1 - K4
No mating half for this connector as it plugs directly into component.
Add connector to the basket. Cable pigtails with your colour choices can then be added to this connector for a small charge from the list below. Please allow up to 48hrs for the crimping to be completed.
1mm 16.5 Amp 1.95mm O.D. Solid Colour Cable HERE,
1mm 16.5 Amp 1.95mm O.D Tracer Colour Cable HERE
Manufacturer:- Aftermarket