2 Way weatherproof amp red lock superseal wiring connector used on Ducati, Aprilla and other makes of motorcycle wiring looms
Note:- The cable seal shown in the picture is for photograhic purposes only. It will be supplied in either yellow or blue depending on what we have in stock at the time. They are all for the same cable size and terminal combination. If you have a preference then check with us the colours we have in stock before placing an order
Can have cable pigtails added, see below:-
Suitable for 0.5mm² to 1.5mm² cable.
Rated to 14 amps max.
Supplied as complete male/female connector with terminals and seals
Suitable Rubber Boot:- Sup-2W-Boot , 2w-EV1-Inj-Sup-Boot
Spare Terminals Male:- Sup_1.5mm_Male_10_Pack Female:- Sup_1.5mm_Fem_AMP_Term_10
ASSEMBLY INSTRUCTIONS
Add connector to the basket. Cable pigtails with your colour choices can then be added to this connector for a small charge from the list below. Please allow up to 48hrs for the crimping to be completed.
1mm 16.5 Amp 1.95mm O.D. Solid Colour Cable HERE,
1mm 16.5 Amp 1.95mm O.D Tracer Colour Cable HERE
Contacts
Receptacle
- Material: phosphor bronze, tin plated
- Lanceless contact
- Double contact spring (mainspring and auxiliary anti-overstress spring) ensuring low insertion force, but high contact force
Tab
- Material: brass, tin plated
- Lanceless contact
- Wire size range: 20-16 AWG
- Current rating: 14 Amp maximum
- Insertion force: max. 8 N
- Contact resistance: max. 3 m ohm
(test current 10 mA)
Wire Seals
- Material: silicon rubber
- Seals shapes to make them easy to insert in the cavity
- The collar in the crimping area provides excellent strain relief on terminals
- Suitable for wire with insulation diameter ranging from .060 [1.5] to .130 [3.3]
Connectors
- Material:
housing and secondary lock: polyamide 6.6 glass filled, U.L. approved radial seal: silicon rubber
- Resistant to:
ozone, salts (CaCI2-NaCI), gasoline, diesel fuel, brake fluid detergents, anti-freeze coolant, transmission gear lubricant, motor oil
- Temperature range: -40°C to +125°C
- Insulation resistance: min. 200 M ohm
- Dielectric withstanding voltage: 1500 Vrms
- Watertight capability: conforming to IEC 529 I.P. 6.7 standards
Description
AMP has developed the AMP SUPERSEAL 1.5 Series connectors family to meet the constantly increasing needs and requirements in safety and reliability of the electrical connection field.
These connectors fulfill all the requirements prescribed by the various automotive and industrial standards.
They are watertight and they exceed the requirements prescribed by the IEC 529 and DIN 40050 I.P. 6.7 standards regarding waterproofness.
The AMP SUPERSEAL 1.5 Series connectors are completely interchangeable and can be connected with existing components and with the devices currently used in the automotive industry (sensors, oil pressure senders, water temperature monitoring, etc.).
The special features of the AMP SUPERSEAL 1.5 Series connectors are as follows:
- Sturdy and reliable contacts: their lanceless design eliminates contact tangling during handling operations.
- Double contact spring: mainspring and auxiliary anti-overstress spring.
- Preassembled secondary lock which ensures correct and complete insertion of the contact in the housing and prevents it from slipping out of the connector. The secondary lock cannot be closed if the contact is not correctly inserted in the housing.
