These white Ducati 6 Way connectors are the OEM part used on the main wiring looms of various Ducati's.

Crimp using a crimper suitable for use on micro terminals. Supplied with 6 x male and 6 x  female terminals.

Ducati 8  way female loom side (left hand handlebar switch) sealed wiring connector supplied with terminals, cable seals and yellow lock.

Length: 27.6mm

Width: 31.0mm

Height: 33.2mm

Mating Half: DUC-8W-LHB-Male-Conn

Manufacturer: Aftermarket

Ducati 8 way female righthand handlebar ride by wire sealed wiring connector supplied with terminals and cable seals

Terminal size: 0.64mm (025)

Length: 21.9mm

Width: 23.4mm

Height: 19.8mm

Also used on some Toyota and Lexus cars

Mating Half:  8W-TS-MAL-CONN

Manufacturer:- Aftermarket

These white Ducati 8 Way connectors are the OEM part used on the main wiring looms of various Ducati's.

Crimp using a crimper suitable for use on micro terminals. Supplied with 8 x male and 8 x  female terminals.

Ducati 8 way male lefthand handlebar (switch side) sealed wiring connector supplied with terminals, cable seals and yellow lock.

Length: 36.5mm

Width: 27.9mm

Height: 20.5mm

Mating Half: DUC-8W-LHB-Fem-Conn

Manufacturer:- Aftermarket

Ducati and MV 8 way male righthand handlebar ride by wire sealed wiring connector supplied with terminals and cable seals

Length: 39.2mm

Width: 20.8mm

Height: 21.6mm

Known Fitment: F3 675 MV

Also used on some Toyota and Lexus cars

Mating Half: 8W-TS-FEM-CONN

Manufacturer:- Aftermarket

Complete 26 way Ducati Dash connector supplied with 26 x terminals. Fits Ducati 749, 999, 848, 1098, 1098R, 1198 motorcycles. Also used on Fueltech FT550 along with the 4 keyway listed below.

NOTE: This is a 3 keyway plug with 2 on the top and 1 on the bottom

We also stock other variations of this plug
4 Keyway connector:- ECU-26W-4KEY-CONN
5 Keyway connector:- ECU-26W-5KEY-CONN
6 Keyway connector:- ECU-26W-6KEY-CONN

Also used on the following Motec parts:
Motec ECU's: M84, M400, M600, M800, & M1 Series M130, M142, M150
Motec Power Distribution Module: PDM15, PDM30
Motec Dash Logger's: CDL3, C125
Motec Expansion box; E888

Terminals suitable for cable sizes 0.5mm² to 1.25mm²

All measurements approx

Manufacturer:- Aftermarket

These pigtails allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Supplied as pictured as a pair of leads with the female plug and 4 red glue lined heat shrink terminals for a completely sealed connection onto the indicators

Known Fitments

Hypermotard: some models* 

Manufacturer:- Aftermarket

These pigtails allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Supplied as pictured as a pair of leads only with the female plug

Known Fitments

Hypermotard: some models*  

These female pigtails allows new indicators to be fitted without cutting the main loom of the motorcycle, just plug and play. Note: If fitting LED indicators you may need to fit a load resistor or aftermarket flasher unit for LED lights if the flash rate is to quick.

Some Hypermotard models use the opposite half of the connector, we can supply this type at no extra cost, please email to enquire.

Supplied as pictured as a pair of leads with 4 red glue lined heat shrink terminals for a completely sealed connection onto the indicators

Fits the following Models:

Monster: 696, 796,821, 1100, 1100 evo, 1100s, 1200, 1200s

Multistrada: 1200 2012, 1200 2013, 1200s 2013, 

Panigale: 899, 1199, 1199s (front only)

Hypermotard: some models*  821, 821SP (Check pictures carefully as some Hypermotards use the opposite side of the connector on the main loom)

848

1098, 1098s

Manufacturer:- Aftermarket