HX series 040 1 way blue female sealed connector with grey terminal lock. Used on Japanese motorcycles and other automotive vehicles as temperature sender plugs

Can have cable pigtail added, see below:

Terminal Size

1.0mm2 (040)

Connector Dimensions

Length:24.5mm  Width: 16.4mm Height: 15.4m

Mating Half: 1W-HX-Male-Conn

1 way female black sealed connector with terminal lock. Used on some some Audi and vag cars 1999 -2017 and other automotive vehicles.

Can have cable pigtail added, see below:-

Connector Dimensions

Length:mm  Width: mm Height: m

Mating Half: N/A

HX series 040 1 way female black sealed connector with grey terminal lock. Used on some  Japanese motorcycles and other automotive vehicles. 

Can have cable pigtail added, see below:

Terminal Size

1.0mm2 (040)

Connector Dimensions

Length:24.5mm  Width: 16.4mm Height: 15.4m

Mating Half: 1W-HX-Male-Conn

HX series 040 1 way male black sealed connector with grey terminal lock. Used on some  Japanese motorcycles and other automotive vehicles.

Can have cable pigtail added, see below:

Terminal Size

1.0mm2 (040)

Connector Dimensions

Length:25.3mm  Width: 15.2mm Height: 17.5mm

Matting Half: 1W-HX-CONN

1 way black sealed connector with blue terminal lock. Used on Honda knock sensor part number 30530-P5M-013 and other vehicle parts. 

Can have cable pigtail added, see below:

Connector Dimnesions: Length: 28.3mm, Width: 19.4mm, Height::21.6mm

Amp Econoseal .070 1 way female sealed wiring connector supplied with terminals, cable seals and yellow lock.

Can have cable pigtail added, see below:

Length: 27mm

Width: 15mm

Height: 18mm

Mating Half: Econo-1WM-Conn

Add connector to the basket. Cable pigtail with your colour choices can then be added to this connector for a small charge from the list below. Please allow up to 48hrs for the crimping to be completed.

Econoseal .070 1 way male sealed wiring connector supplied with terminals, cable seals and yellow lock.

Can have cable pigtail added, see below:

Length: 32.5mm

Width: 11mm including keyways

Height: 11mm

Mating Half: Econo-1WF-Conn

1 way sealed replacement part for Ford oil pressure sensor plug or oil pressure sending unit connector

Can have cable pigtail added, see below:

Key pattern: A

Quality aftermarket replacement part for 3U2Z-14S411-MHA

1 Way weatherproof amp red lock superseal wiring connector used on Ducati, Aprilla and other makes of motorcycle wiring looms

Can have cable pigtails added, see below:

Contacts
Receptacle

• Material: phosphor bronze, tin plated
• Lanceless contact
• Double contact spring (mainspring and auxiliary anti-overstress spring) ensuring low insertion force, but high contact force

Tab

• Material: brass, tin plated
• Lanceless contact
  • Wire size range: 20-16 AWG
  • Current rating: 14 Amp maximum
  • Insertion force: max. 8 N
  • Contact resistance: max. 3 m ohms
    (test current 10 mA)

Wire Seals

• Material: silicon rubber
• Seals shapes to make them easy to insert in the cavity
• The collar in the crimping area provides excellent strain relief on terminals
• Suitable for wire with insulation diameter ranging from .060 [1.5] to .130 [3.3]

Connectors

• Material:
  housing and secondary lock: polyamide 6.6 glass filled, U.L. approved radial seal: silicon rubber
• Resistant to:
  ozone, salts (CaCI₂-NaCI), gasoline, diesel fuel, brake fluid detergents, anti-freeze coolant, transmission gear lubricant, motor oil
• Temperature range: -40°C to +125°C
• Insulation resistance: min. 200 M ohms
• Dielectric withstanding voltage: 1500 Vrms
• Watertight capability: conforming to IEC 529 I.P. 6.7 standards

Description

AMP has developed the AMP SUPERSEAL 1.5 Series connectors family to meet the constantly increasing needs and requirements in safety and reliability of the electrical connection field.

These connectors fulfill all the requirements prescribed by the various automotive and industrial standards.

They are watertight and they exceed the requirements prescribed by the IEC 529 and DIN 40050 I.P. 6.7 standards regarding waterproofness.

The AMP SUPERSEAL 1.5 Series connectors are completely interchangeable and can be connected with existing components and with the devices currently used in the automotive industry (sensors, oil pressure senders, water temperature monitoring, etc.).

The special features of the AMP SUPERSEAL 1.5 Series connectors are as follows:

• Sturdy and reliable contacts: their lanceless design eliminates contact tangling during handling operations.
• Double contact spring: mainspring and auxiliary anti-overstress spring.
• Preassembled secondary lock which ensures correct and complete insertion of the contact in the housing and prevents it from slipping out of the connector. The secondary lock cannot be closed if the contact is not correctly inserted in the housing

Metri-Pack Grey Connector for 1 Way 280 Series.

Can have cable pigtails added, see below:

ASSEMBLY INSTRUCTIONS

1 way Delphi 280 series weatherproof automotive and marine wiring connector complete with male & female terminals, seals and TPA locks
Suitable for 1.5mm² to 2.5mm² cable, other terminal and seal sizes available
Rated to 30 amps.

280 Series Spec
Cable Range Sealed               0.35mm² - 5.0mm²
Current Range                        0 - 30 Amps
Temperature Range                -40oC to +125oC
Resistance                           <10m ohms @20mV
Voltage Drop                         <3.0mV/Amp
Centre Line Spacing                7.7mm
Blade Width                            2.8mm

Add connector to the basket. Cable pigtails with your colour choices can then be added to this connector for a small charge from the list below. Please allow up to 48hrs for the crimping to be completed.

1.5mm 21 Amp 2.3mm O.D. Solid Colour Cable HERE,

2mm 25 Amp 2.55mm O.D. Solid Colour Cable HERE,

2.5mm 29 Amp 2.75mm O.D. Solid Colour Cable HERE,